What Are The Common Faults Of The Gear Reducer,Gearboxes,Speed Reducer?
1. Wear and tear of the reducer bearing chamber
It also includes the wear of the housing bearing box, the inner bore bearing chamber of the box, and the gearbox bearing chamber. This situation is mainly caused by the improper adjustment of the parallelism and coaxiality of the shafts when installing the shafts and bearings; in the process of long-term operation Deflection force (radial or axial) or abnormal vibration of the box body appears in the process, causing the shaft and bearing to be stressed to a certain degree of wear on the bearing chamber.
2. The shaft diameter of the gear shaft of the reducer is worn
The main wear parts are the shaft head, keyway, etc. The reason for this kind of failure is the frequent overload start and the material problem of some parts during operation.
3. The bearing position of the drive shaft of the reducer is worn or the bearing is faulty
Incorrect assembly will not only accelerate the wear of the bearing, but also breakage and high-temperature seizure. Especially for bearings that cannot be self-aligning; poor machining accuracy or improper installation of the journal or bearing seat hole, and too much shaft deflection will cause the inner and outer rings of the bearing to tilt each other, resulting in uneven distribution of the bearing load. The stress concentration will be destroyed prematurely.
4. Leakage on the joint surface of the reducer
Oil leakage is manifested in the joint surface of the reduction case body and the bearing end cover, mainly due to leaks in the joint surface sealing gasket or sealing compound application process; improper maintenance process; during equipment maintenance, due to the removal of dirt on the joint surface Incomplete, improper selection of sealant, reverse installation of seals, and failure to replace seals in time will cause oil leakage; this can be avoided after strengthening the assembly process requirements.
5. Gear tooth failure of reducer
Common forms of gear tooth failure include: broken gear teeth and damage to the tooth surface. Gear tooth fracture generally occurs at the tooth root, because the bending stress at the tooth root is the largest and there is stress concentration; the damage of the tooth surface can be divided into fatigue pitting of the tooth surface, abrasive wear, gluing and plastic deformation.
Measures to prevent gear tooth failure include: increasing tooth surface hardness and surface roughness requirements; choosing lubricants with higher viscosity; supplying enough lubricating oil and keeping the lubricating oil clean; avoiding frequent starts and severe overload and impact; improving assembly Quality and strengthen maintenance management.
CAMEL Transmission Machinery Factory is a professional supplier,distributor and manufacturer of speed reducers and related accesories. including gear reducers,rotary reducer,worm gearbox, servo-gearbox, planetary gearboxes,planetary gear reducer helical gear reducers,planetary gearbox,right angle gear reducer,gear reduction,gear motors, electrical motors,DC motors, DC gear motor,dc gearedmotors,AC gear motor,AC motors, servo motors,ac servo motor,dc servo motor,servomotor, bearings, gears,spur gear,helical gear,bevel gear,worm gear,planetary gear, couplings, oil seals, belts, chains, etc.If you have any need,please feel free to contact CAMEL:
sales@gears-speed-reducers.com
https://www.gears-speed-reducers.com