1. Master the cycle of replacing the automatic transmission oil.
The internal control mechanism of the automatic transmission is very precise, and the clearance is small, so most of the automatic transmissions have a oil change interval of two years or 40 to 60,000 kilometers. In the normal use process, the operating temperature of the transmission oil is generally around 120 degrees Celsius, so the quality of the oil is very high and must be kept clean. Secondly, after the transmission oil has been used for a long time, it will produce oil stains, which may form sludge, which will increase the wear of the friction plates and various components, and also affect the system oil pressure, which will affect the power transmission. Third, the sludge in the dirty oil will cause the movement of the valve body in each valve body to be unsatisfactory, and the oil pressure control is affected, thereby causing an abnormality in the automatic transmission. Always check.
2. Replace the transmission oil properly.
china reduction gearbox factory_RV Aluminum Worm Electric Motor Gear Reducer
We’re professional rv aluminum worm electric motor gear reducer manufacturers and suppliers in China, specialized in providing high quality customized products. We warmly welcome you to wholesale rv aluminum worm electric motor gear reducer at low price from our factory. Contact us for quotation.
The better oil change method is dynamic oil change. The special gearbox cleaning equipment is used. During the operation of the gearbox, the old oil is fully circulated, and the new gearbox oil is added after the discharge, so that the oil change rate is as high as possible. More than 90, to ensure a good oil change.
3. Whether the automatic transmission oil level is normal.
The automatic transmission oil inspection method is different from the engine oil. The engine oil is checked in the cold state, and the transmission oil needs to preheat the oil to about 50 °C, and then the gear lever stays in each gear for 2 seconds. After being placed in the parking gear, the normal oil level of the dipstick should be between the highest and lowest lines. If it is not enough, the same quality oil should be added in time.
CAMEL Transmission Machinery Factory is a professional supplier,distributor and manufacturer of gear reducers and related accesories. including planetary gearbox,worm gearbox,rotary reducer,servo-gearbox,planetary gear reducer,helical gear reducers,planetary gearbox,right angle gear reducer, gear reduction,gear motors, electrical motors,DC motors, DC gear motor,dc gearedmotors,AC gear motor,AC motors, servo motors,servomotor, bearings, spur gear,helical gear,bevel gear,worm gear,planetary gear, couplings, oil seals, belts, chains, etc.If you have any need, please feel free to contact CAMEL:
Mob/Wechat/Whatsapp:8618015057952
