Installation method analysis of sew reducer? The new sew reducer of
has an integrated structure and small appearance, just like a small motor. However, the function of this sew reducer is to cooperate with the work machine for deceleration, so it needs to be installed on the work machine to play the role of deceleration. So what is the installation method of sew reducer? In fact, the installation method of
and
sew reducer is very simple. It doesn’t have many parts. It only needs to install these parts according to the instructions. First of all, the connection between the reducer and the working machine is very important. You can see a big hole in the reducer. In fact, this hole is specially prepared for the working machine. The reducer is very small and light. It can be directly sleeved on the main shaft of the working machine. Then, when the reducer is running, the counter torque on the box will be stressed and start to work. At this time, fix the counter torque with a support so that both ends look more balanced and matched.
how to install the counter torque support of sew reducer? The counter torque support can be directly installed on the other side of the working machine, which can reduce the bending moment attached to the working shaft. In addition, whether the support is fixed or how the bearing force is will cause the fluctuation of the torque. Therefore, after the support is installed, it must be fixed and checked again to ensure that there is no problem with the support, Before proceeding to the next step.
in addition, the distance between sew reducer and working machine is worth discussing. If the distance is too close, it will inevitably affect the operation and distortion of the main shaft of the working machine, and it is difficult to exert force. Therefore, the best way is to shorten the distance between the reducer and the working machine. The best distance is 5-10mm, but it is allowed to exceed a little range.
and
the above is about the installation method of sew reducer. In fact, the reducer is a small motor, which can be installed casually. However, the installation method still needs to be paid attention to. After all, it is connected with the working machine. Therefore, when connecting the working machine, it is necessary to select the position and installation distance, so that the rotating shaft of the working machine will not operate normally or the reducer will not work at all due to the problem of distance.
CAMEL Transmission Machinery Factory is a professional supplier,distributor and manufacturer of gear reducers and related accesories. including rotary reducer,worm gearbox, servo-gearbox, planetary gearboxes,planetary gear reducer, helical gear reducers,planetary gearbox,right angle gear reducer, gear reduction,gear motors, electrical motors,DC motors, DC gear motor,dc gearedmotors,AC gear motor,AC motors, servo motors,servomotor, bearings, spur gear,helical gear,bevel gear,worm gear,planetary gear, couplings, oil seals, belts, chains, etc.If you have any need, please feel free to contact CAMEL: Whatsapp:8618015057952 
