How should bonfly reducer be overhauled? Maintenance method of bangfeili reducer bangfeili reducer has been used for a long time and will produce various vibration and noise.
This shows that the internal parts of the reducer are damaged and should be repaired or replaced.
Now it is explained one by one: (1) gear wear.
Gear wear mainly includes tooth surface wear, broken gear teeth, gear shaft hole or keyway wear.
(2) the bearing hole of the reducer is worn and the screw hole thread is invalid.
(3) wear of reducer shaft surface, wear of keyway, bending of shaft, etc.
For the above different failure modes, the repair methods of on-site repair and replacement of parts can be adopted.
For the wear of shaft surface, shaft hole and keyway, electroplating method can be adopted to restore the accuracy of the original parts.
The bending of shaft can also be straightened by press.
There is no other way to deal with such damage as tooth breakage, so we have to re process new parts.
These are only remedial measures after the event.
In order to ensure the service life of the reducer, the key is to select the type at the time of purchase, ensure a high safety factor, operate in strict accordance with the operation manual, ensure lubrication and avoid overload.
If the reducer is abnormal during operation, it shall be checked as soon as possible and used after troubleshooting.
CAMEL Transmission Machinery Factory is a professional supplier,distributor and manufacturer of gear reducers and related accesories.
including rotary reducer,worm gearbox, servo-gearbox, planetary gearboxes,planetary gear reducer, helical gear reducers,planetary gearbox,right angle gear reducer, gear reduction,gear motors, electrical motors, DC motors, DC gear motor,dc gearedmotors,AC gear motor,AC motors, servo motors,servomotor, bearings, spur gear,helical gear,bevel gear,worm gear,planetary gear, couplings, oil seals, belts, chains, etc.
If you have any need, please feel free to contact CAMEL: Whatsapp:8618015057952 
.