How many precautions do you know when using the reducer? Pay attention to the following points when using the reducer: 1.
Hammering is strictly prohibited.
When coupling parts such as coupling, pulley and sprocket are installed on the output shaft of the reducer, the direct hammering method can not be adopted.
Because the output shaft structure of the reducer can not bear axial hammering, the screw can be screwed into the coupling part through the screw hole at the shaft end.2. Be sure to install the breather cap (exhaust plug).
Before use, replace the plug at the highest position with the exhaust plug to ensure that the gas in the body is discharged during the operation of the reducer.
If it is not replaced in time, the reducer will operate for a long time, resulting in the expansion of the oil seal and oil leakage of the reducer.3. Replace the lubricating oil in time, paying special attention to the first time.
Pay special attention to the first oil change.
Replace the lubricating oil in time after the reducer runs for 300 ~ 400 hours for the first time, and then replace the lubricating oil every 1500 ~ 2000 hours.
In addition, in the workplace with bad working environment, high temperature and large dust, the lubricating oil shall be inspected every half a month.
If dirt is found in the lubricating oil, the lubricating oil shall be replaced to keep the lubricating oil clean, prolong the service life of the reducer and improve economic benefits.
CAMEL Transmission Machinery Factory is a professional supplier,distributor and manufacturer of gear reducers and related accesories.
including rotary reducer,worm gearbox, servo-gearbox, planetary gearboxes,planetary gear reducer, helical gear reducers,planetary gearbox,right angle gear reducer, gear reduction,gear motors, electrical motors, DC motors, DC gear motor,dc gearedmotors,AC gear motor,AC motors, servo motors,servomotor, bearings, spur gear,helical gear,bevel gear,worm gear,planetary gear, couplings, oil seals, belts, chains, etc.
If you have any need, please feel free to contact CAMEL: Whatsapp:8618015057952 
.